Saturday, December 3, 2011

Time Lapse Project - CHDK

 Canon Hack Development Kit

Today I loaded the CHDK firmware to my SD Card.

I Located the appropriate firmware on the wiki

Followed the installation guide here:

Then it was finished! (I thought it would be harder than this!)

So I took the next step and located a script for running the time lapse auto shoot..

I came across another part of the wiki where users had already written scritps to perform these actions!

I tried a few different scripts, but ended up using the one below:

rem Author - Keoeeit
 rem Upgraded by Mika Tanninen
 @title Ultra Intervalometer
 @param a Delay 1st Shot (Mins)
 @default a 0
 @param b Delay 1st Shot (Secs)
 @default b 0
 @param c Number of Shots (0 inf)
 @default c 0
 @param d Interval (Minutes)
 @default d 0
 @param e Interval (Seconds)
 @default e 10
 @param f Interval (10th Seconds)
 @default f 0
 if c<1 then let c=0
 if t<100 then let t=100
 if g<=0 then goto "interval"
 for m=1 to g
  print "Intvl Begins:", (g-m)/60; "min", (g-m)%60; "sec"
  sleep 930
  next m
   if c=0 then print "Shot", n else print "Shot", n, "of", c
   if n=c then end
   sleep t
   goto "interval"
Then on the camera I loaded the script up, and it started shooting!

This is all too easy :)

One question I had was, how do I get the script to start as soon as the camera is turned on?
Turns out there is a feature for that in CHDK already as well!

As I was researching how to do it, I came across this persons issue where they had turned autostart on by accident!

So I enabled autostart and the script... auto started!

Naturally I grabbed my gorillapod and threw it onto my window ledge and took it's very first time lapse!

Above: The camera on my Joby GorillaPod SLR Edition.

How did it turn out you ask?

See for yourself :)

(I reversed the footage, as it was more interesting watching the sunrise.... set.. so to speak :) )

1 comment:

gazzat5 said...

There's a couple of scripts which are great for capturing sunrise/set as well as intervalometer